All websites

WHAT IS A PRIMER, AND WHY IS IT IMPORTANT? 

Primers are materials used as a preparatory coating to enhance the adhesion of overlaying compounds. They regulate the absorption rate of porous substrates, and improve adhesion to non-porous materials.

It's important to use the appropriate primer designed for the material, to ensure good bonding to these substrates. Failure to do so can lead to de-bonding of coverings.

POROUS SUBSTRATE PRIMERS

bostik-ultra-multiprime-A530.jpg
bostik-ultra-multiprime-A530.jpg
ULTRA MULTIPRIME A530
  • Product
General-purpose primer designed for use on porous surfaces
bostik-ultra-prime-A510-400x300.png
bostik-ultra-prime-A510-400x300.png
ULTRA PRIME A510
  • Product
High performance primer for porous substrates

POROUS SUBSTRATES

A porous or absorbent substrate will allow a bead of water to easily soak into and wet out the surface of the substrate.  

Primer must be used prior to adhesive, sealant, waterproofing and leveling compound application to avoid pinholes.

Concrete that is overworked or burnished at the time of placement can become non-porous when cured. Mechanical abrasion, such as captive shot blasting or vacuumed grinding is required to open substrate pores prior to the application of a prime.

NON-POROUS SUBSTRATE PRIMERS

n40_primer_productsignpost_372x240.jpg
n40_primer_productsignpost_372x240.jpg
N40 PRIMER
  • Product
Promotes adhesion to non-porous substrates
bostik-ultra-prime-grip-520-400x300.png
bostik-ultra-prime-grip-520-400x300.png
ULTRA PRIME GRIP
  • Product
One-component primer for cementitious products
bostik-specialist-primer-400x300.jpg
bostik-specialist-primer-400x300.jpg
SPECIALIST PRIMER
  • Product
Aqueous primer for use with Dampfix PU

NON-POROUS SUBSTRATES

A non-porous or impervious substrate will cause a bead of water to be retained on the surface of the substrate as a raised droplet. The droplet does not easily soak into the surface of the substrate. 

Bostik Prime Grip is an ideal general-purpose primer for non-porous surfaces. 

Bostik N40 is best for rigid plastic and metallic substrates such as uPVC drainage outlets and penetrations, aluminium angle water stops, brass tap bodies, copper or galvanised penetrations, stainless steel drains & gutters etc.

MOISTURE VAPOUR BARRIERS

bostik-moisture-seal-e500-400x300.jpg
bostik-moisture-seal-e500-400x300.jpg
ULTRA MOISTURE SEAL
  • Product
2 part moisture vapour barrier used in waterproofing systems
bostik-ultra-seal-400x300.jpg
bostik-ultra-seal-400x300.jpg
ULTRASEAL
  • Product
One coat, 2 part product for flooring systems

MOISTURE VAPOUR BARRIERS

Moisture vapour barriers prevent moisture from diffusing into your substrate which can cause timber boards to 'pop'. They should be used when rising damp is an issue, and can be used on concrete, fibre cement, stone, masonry, structural plywood, metal, and brick.

DISCOVER OUR FLOORING SYSTEM PRODUCTS

Top