920 FS
920 Fast Set is a one-part, gun grade urethane sealant/adhesive that moisture cures to an extremely tough, resilient seal that exhibits excellent tear and abrasion resistance while retaining permanent elastomeric properties.
This product has tenacious adhesion to most common marine substrates including virtually all woods, metal, FRP and most plastics. It offers fast curing properties while retaining the handling and performance properties of the standard rate cure of 920. It can be used as either an adhesive or as a sealant.
920FS is recommended for any marine application above or below the water line where a quality elastomeric seal is required. It is suitable for sealing hardware around windows and doors, deck to hull assembly, hull seams, keel joints and undermoldings.It is not designed as a glazing sealant in which the adhesive bond to glass is exposed to sunlight and appreciable amounts of ultraviolet radiation.
This product should not be used when the temperature is below 40°F.
- Canada
Smart Advantages
-
Moisture cures to an extremely tough, resilient seal
- Tenacious adhesion to most common marine substrates including virtually all woods, metal, FRP and most plastics.
-
Fast curing properties while retaining the handling and performance properties of the standard rate cure of 920.
Marine Fast Set Urethane Adhesive/Sealant
920 Fast Set is a one-part, gun grade urethane sealant/adhesive that moisture cures to an extremely tough, resilient seal that exhibits excellent tear and abrasion resistance while retaining permanent elastomeric properties.
This product has tenacious adhesion to most common marine substrates including virtually all woods, metal, FRP and most plastics. It offers fast curing properties while retaining the handling and performance properties of the standard rate cure of 920. It can be used as either an adhesive or as a sealant.
920FS is recommended for any marine application above or below the water line where a quality elastomeric seal is required. It is suitable for sealing hardware around windows and doors, deck to hull assembly, hull seams, keel joints and undermoldings.It is not designed as a glazing sealant in which the adhesive bond to glass is exposed to sunlight and appreciable amounts of ultraviolet radiation.
This product should not be used when the temperature is below 40°F.