Brands and countries
  • Product

BUTYL 1183

Hot melt butyl
SDS
Product overview
Thermoplastic sealant in profile form suitable for sealing joints or fixation that do not bear mechanical forces. - Permanent plastic and permanent tacky - Good adhesion on almost all substrates - Good aging and weather resistance - Good water resistance - High water vapour tightness - Solvent free (no shrinkage)
Available sizes
ROLLS 315 x 0.8MM x 60 M/P32
ROLLS 25 x 0.8 MM x 90 M/C96
ROLLS 445 x 0.8MM x 60 M/P16
ROLLS 40 x 3MM x 32M/P54
ROLLS 135x1,2MM x25M/P36
ROLLS 295 x 0.8MM x 62 M/P32
ROLLS 445 x 0.6MM x 62 M/P16
ROLLS 175 x 0.8MM x 50M/P32
ROLLS 175 x 1MM x 40 M/P32
ROLLS 275 x 0.8MM x 60 M/P32
ROLLS 445 x 1,2MM x 40 M/P16
ROLLS 244 x 0.8MM x 60 M/P32
ROLLS 294 x 1.1MM x 40 M/P32
ROLLS 25 x 1 MM x 90 M/C96
ROLLS 37 x 0.4MM x 153M/C72
ROLLS/C60
Cleaning Remove main portions mechanically ( „dab off” ). Residuals can be cleaned with Bostik Solvent 299
Method Of Use The Butyl 1184 profiles are applied direct from the roll to one side of the joint. Cut according to the required length and remove the release paper and press the counter part to the sealing strip (best using a roll).
Safety Instructions Observe the standard hygienic precautions for chemical goods when working with Butyl 1183. ? Do not eat, drink or smoke ? Avoid contact with eyes and skin ? Wash hands before breaks and after end of work FOR FURTHER INFORMATION PLEASE REFER TO OUR SAFETY DATA SHEET
Stability From -30°C to 90°C temperature and form stable. Butyl 1184 behaves thermoplastic: At low temperature the hardness increases, at high temperatures the mass becomes softer and tackier. Good aging resistance, especially under warm and humid conditions. Stable against water and saltwater in the range of pH 5 - 9 . Not resistance against oil, grease, white spirit and other solvents.
Storage Store under dry conditions, protect against mechanical deformation. Shelf life at least 24 months.
Adhesive Technology HM BUTYL SEALANT – profiles
Colors Black
Adhesion Very good to a variety of different materials. In contact with plastic materials a migration of plasticizer may occur – we recommend to carry out tests before application! Surfaces must be dry and mostly clean, free of dust, oil or grease.
Chemical Base Synthetic rubber ( Base IIR)
Density 1,35 – 1,45 g/ml (Pycnometer; 23°C; orienting to DIN EN ISO 2811-1)
Melt Index 30 - 50 ml/10 min (140°C; 2,16kg; 2mm nozzle; orienting to DIN EN ISO 1133-1)
Smart Advantages

- Permanent plastic and permanent tacky

- Aging and weather resistance

- Good water resistance

- Good water vapour tightness

- Good adhesion to almost all substrates

- Odour free at room temperature

- Long-term resistance

- Solvent free

- Shrinkage free

- Does not cause stress corrosion cracking on PMMA or Polycarbonate

Applications

- Suitable for interior and exterior applications

- Sealing of lap joints

- Bonding and fixation foils and light weight materials

- Temporary fixation

- Corrosion protection in metal joints especially between dissimilar materials - Vibration and sound deadening

Top