Hardwood Wall Plank & Tread Cap Adhesive
Bostik GreenForce® is a high performance hardwood flooring adhesive and moisture control membrane all in one. With Bostik’s breakthrough AXIOS® Tri-Linking™ Polymer Technology, GreenForce® maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure. Bostik GreenForce® has zero VOC’s (as calculated per SCAQMD Rule 1168) and does NOT contain any water.
Use GreenForce® in Applications that Require Antimicrobial Protection
GreenForce® comes with Bostik’s BLOCKADE® antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the cured membrane. The cured membrane resists stains caused by mold.
GreenForce® hardwood flooring adhesive has extremely low moisture vapor permeability and is not adversely affected by moisture. As a result, costly and time consuming concrete moisture testing is not required when the slab is properly prepared, dry to the touch and fully cured.
The elastomeric characteristics of GreenForce® establish an anti-fracture membrane that can bridge cracks up to 1/8" (3mm), which can occur in the substrate prior to or after installation. This superior elasticity allows GreenForce® adhesive to move with the wood as it expands and contracts with changes in humidity and temperature over the life of the floor.
GreenForce® adheres to all the most common substrates used in hardwood flooring installation
Bostik GreenForce® has no restrictions on board width or length. It may be used over all properly prepared substrates common to hardwood flooring installations.
|Where to Use||Substrates||Materials|
|Offices and Light Commercial||Plywood||Engineered Hardwood|
|Offices||Recycled Rubber Underlayment||Cork|
|Ceramic Tile||Ceramic tile, marble, and stone inlays (residential or light commercial only)|
|Cement Backer Board|
|Gypsum Underlayments (dry, above-grade)|