Brands and countries
  • Product

BOSTIK 3851

Solvent based adhesive
SDS
Product overview
Bostik 3851 is a translucent grey, natural rubber solution in petroleum solvents.
Available sizes
CANS 5 L/P162
Key Benefits - Designed for bonding natural rubber & latex - Brush application - Fast drying
Adhesive Technology SOLVENT BASED
Flash Point In the group -18 to -7 °C
Method Of Use
  • Ensure rubber surfaces are thoroughly clean and dry, abrading the surfaces if possible. Leather surfaces should also be abraded if necessary.
  • Apply Bostik 3851 by brush to both surfaces to be joined and allow the adhesive to become touch dry (approximately 10 to 20 minutes) before bonding the surfaces together under pressure.
  • NOTE: On porous surfaces it may be necessary to apply more than one coat of adhesive. In this case adhesive application to the rubber should coincide with the last coating on the porous surface, allowing 30 minutes between coats.
Recommended Use Bostik 3851 is used for bonding natural rubber and latex sheeting to each other and to porous surfaces such as leather, canvas etc.
Solids Content Approx. 11 %
Viscosity Approx. 8000 [mPa.s] Brookfield RVT, 10rpm at 25°C
Important safety data sheet should be carefully studied by those
Recommended Use Bostik 3851 is used for bonding natural rubber and latex sheeting to each other and to porous surfaces such as leather, canvas etc.
Shelf Life At least 12 months from date of manufacture, under the above conditions of storage.
Storage Store in sealed containers in a dry, well ventilated place between 5 – 25°C.
Method Of Use
  • Ensure rubber surfaces are thoroughly clean and dry, abrading the surfaces if possible. Leather surfaces should also be abraded if necessary.
  • Apply Bostik 3851 by brush to both surfaces to be joined and allow the adhesive to become touch dry (approximately 10 to 20 minutes) before bonding the surfaces together under pressure.
  • NOTE: On porous surfaces it may be necessary to apply more than one coat of adhesive. In this case adhesive application to the rubber should coincide with the last coating on the porous surface, allowing 30 minutes between coats.

Related market & applications

Assembly

Top