EVO-STIK CLEANER 7
-
TDS
-
SDS
| Key Benefits | - Thinner for PU adhesives - Cleaner for PVC shoe materials - Highly flammable |
| Adhesive Technology | SOLVENT BASED |
| Flash Point | In the group -18 to -7 °C |
| Method Of Use | Note: A small trial should be carried out to ensure that • Moisten rag or cotton wool with Cleaner 7 and wipe the contaminated surface, avoiding surface recontamination by frequently changing the rag/cotton wool. • Allow residual solvent to dry before carrying out subsequent operations. the surfaces will not be attacked before cleaning commences |
| Recommended Use | Cleaner 7 is suitable for thinning solvent-borne nitrile and polyurethane adhesives to provide lower viscosities for meeting special application requirements. It is also suitable for cleaning application equipment used with the above adhesive types and removing excess adhesive. Cleaner 7 may be used for cleaning plastic surfaces prior to adhesive application. The UK Ministry of Defence quality assurance and release document relating to Cleaner 7 is AFS 342J. |
| Important | Before embarking on any work involving Cleaner 7 the safety data sheet should be carefully studied by those carrying out the work. Please take care when opening the inner seal in the can. |
| Recommended Use | Cleaner 7 is suitable for thinning solvent-borne nitrile and polyurethane adhesives to provide lower viscosities for meeting special application requirements. It is also suitable for cleaning application equipment used with the above adhesive types and removing excess adhesive. Cleaner 7 may be used for cleaning plastic surfaces prior to adhesive application. The UK Ministry of Defence quality assurance and release document relating to Cleaner 7 is AFS 342J. |
| Shelf Life | At least 2 years from date of manufacture, under the above conditions of storage. |
| Storage | Store in original sealed containers in a dry, well ventilated, flameproof place between 5 - 25°C. |
| Method Of Use | Note: A small trial should be carried out to ensure that • Moisten rag or cotton wool with Cleaner 7 and wipe the contaminated surface, avoiding surface recontamination by frequently changing the rag/cotton wool. • Allow residual solvent to dry before carrying out subsequent operations. the surfaces will not be attacked before cleaning commences |