GREENFORCE®
GreenForce is a high-performance adhesive, sound reduction membrane, and moisture vapor control membrane all in one. Bostik’s breakthrough AXIOS® Tri-Linking Polymer Technology used in this formulation maintains the superior long-term durability and moisture vapor protection properties of high-end urethane adhesives. However, it is easier to spread on and clean off of prefinished flooring before and after cure. This adhesive has zero VOCs (as calculated per SCAQMD Rule 1168) and does NOT contain any water. GreenForce comes with Bostik’s BLOCKADE® antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the cured membrane. The cured membrane resists stains caused by mold.
- Canada
Smart Advantages
-
TDS
-
Wood Flooring Installation Products Specifications
- 2 in 1: flooring adhesive and moisture vapor control
- Easy clean before & after cure
- Lifetime warranty for unlimited moisture vapor protection
- Superior bond strength & green grab
- Anti-fracture performance; can bridge cracks up to ⅛ inch
- Zero VOC content (as calculated per SCAQMD Rule 1168)
- No restriction on board length or width
- Blockade® Antimicrobial protection
- May contribute toward LEED® v4 EQ Credit
Superior Moisture Vapor Control Protection
GreenForce has extremely low moisture-vapor permeability and is not adversely affected by moisture vapor. As a result, costly and time-consuming concrete moisture vapor testing is not required when the slab is properly prepared, dry to the touch, and fully cured.
Anti-Fracture Performance
GreenForce’s elastomeric characteristics establish an anti-fracture membrane that can bridge cracks up to 1/8" (3mm), which can occur in the substrate prior to or after installation. This superior elasticity allows the adhesive to move with the wood as it expands and contracts with changes in humidity and temperature over the life of the floor.
GreenForce adheres to all the most common substrates used in hardwood flooring installation
Bostik GreenForce has no restrictions on board width or length. It may be used over all properly prepared substrates common to hardwood flooring installations.
Where to Use | Substrates | Materials |
---|---|---|
Residential | Concrete | Solid Hardwood |
Offices | Plywood | Engineered Hardwood |
Heavy Commercial | OSB | Bamboo |
Light Commercial | Recycled Rubber Underlayment | Cork |
Hospital | Well-bonded Vinyl | Parquet |
Terrazzo | Plywood | |
Ceramic Tile | Ceramic tile, marble, and stone inlays (residential or light commercial only) | |
Cement Backer Board | ||
Gypsum Underlayments (dry, above-grade) | ||
Cement Patch/Underlayment |