GREENFORCE®
Bostik GreenForce is a high performance hardwood flooring adhesive and moisture control membrane all in one. With Bostik’s breakthrough AXIOS® Tri-Linking Polymer Technology, GreenForce maintains the superior long term durability and moisture protection properties of high-end urethane hardwood floor adhesive, but it is easier to spread and clean off of prefinished flooring, even after full cure. Bostik GreenForce has zero VOC’s (as calculated per SCAQMD Rule 1168) and does NOT contain any water
- Canada
- United States of America
Smart Advantages
-
TDS
-
SDS
-
3-Part Specifications
-
Bostik Commercial Hardwood Flooring Installation Products Limited Warranty
-
FloorScore Certification Registration SCS-FS-08383
- 2 in 1: flooring adhesive and moisture vapor control
- Easy clean before & after cure
- Lifetime warranty for unlimited moisture vapor protection
- Superior bond strength & green grab
- Anti-fracture performance; can bridge cracks up to ⅛ inch
- Zero VOC content (as calculated per SCAQMD Rule 1168)
- No restriction on board length or width
- Blockade® Antimicrobial protection
- May contribute toward LEED® v4 EQ Credit
Use GreenForce in Applications that Require Antimicrobial Protection
GreenForce comes with Bostik’s BLOCKADE antimicrobial protection, which inhibits the growth of bacteria, mold or mildew on the surface of the cured membrane. The cured membrane resists stains caused by mold.
GreenForce is a Flooring Adhesive and Moisture Control Membrane in One
GreenForce hardwood flooring adhesive has extremely low moisture vapor permeability and is not adversely affected by moisture. As a result, costly and time consuming concrete moisture testing is not required when the slab is properly prepared, dry to the touch and fully cured.
Use GreenForce in Applications that Require an Anti-fracture, Antimicrobial Hardwood Flooring Adhesive
The elastomeric characteristics of GreenForce establish an anti-fracture membrane that can bridge cracks up to 1/8" (3mm), which can occur in the substrate prior to or after installation. This superior elasticity allows GreenForce adhesive to move with the wood as it expands and contracts with changes in humidity and temperature over the life of the floor.
GreenForce adheres to all the most common substrates used in hardwood flooring installation
Bostik GreenForce has no restrictions on board width or length. It may be used over all properly prepared substrates common to hardwood flooring installations.
| Where to Use | Substrates | Materials |
|---|---|---|
| Residential | Concrete | Solid Hardwood |
| Offices and Light Commercial | Plywood | Engineered Hardwood |
| Heavy Commercial | OSB | Bamboo |
| Offices | Recycled Rubber Underlayment | Cork |
| Hospital | Well-bonded Vinyl | Parquet |
| Terrazzo | Plywood | |
| Ceramic Tile | Ceramic tile, marble, and stone inlays (residential or light commercial only) | |
| Cement Backer Board | ||
| Gypsum Underlayments (dry, above-grade) | ||
| Cement Patch/Underlayment |
Related products
