HSL 1202
Vitel
Product overview
HSL1202 is a solvent based adhesive formulated for use in
lidding applications. This low temperature heat seal
coating gives smooth, peel-able bonds and is well suited
for use with a variety of tray stocks, particularly PET.
HSL1202 is formulated to have good clarity, offers
inherent UV resistance, and can be applied at room
temperature.
Available sizes
CANS 1 L/C6-SAMPLE
POLYJERRIES 19 L/P24
-
TDS
-
SDS
| Key Benefits | - Low activation temperature - Good clarity - Adhesion to a variety of tray stocks |
| Applications | On all dry laminating machines, with rollers. HSL1202 has to be stirred well before use. |
| Applications Weight | A minimum coat weight of 2.4 g/m² (dry). Optimum performance is obtained with an application weight of approx. 3.0 - 5.5 g/m² (depending on required bond performance). |
| Density | 0.94 g/cm³ @ 23°C |
| Dilution | Dilution may be done with ethyl acetate or acetone. The adhesive system should be processed at a solids content of approximately 20 - 25% when applied via gravure. |
| Drying | Drying conditions must be adjusted to substrate, application weight and line speed in order to avoid the retention of solvents. |
| DSC Glass Transition | 5.0 [°C] |
| Sealing Conditions | A minimum temperature of 115°C should be used to activate this product. Depending on the process, the recommended application temperature range for HSL1202 is 140 - 190°C. |
| Viscosity | Approx. 200 [mPa.s] @ 23°C |
| Precautions | During processing, solvent vapours must be exhausted by an adequate ventilation. The corresponding EEC Material Safety Data Sheet is part of this technical information. |