BOSTIK SAF30 5
Methacrylate adhesives
Product overview
The SAF range is made of patented methacrylate adhesives and shows unmatched performance in term of resistance and flexibility. These adhesives have been designed for bonding a wide range of dissimilar substrates including metals and plastics as well as composite materials for industrial applications. The outstanding properties of the SAF range allow structural bonding while keeping flexibility and fatigue resistance. The SAF range products have been developed to resist the most aggressive environments and extreme temperatures. It shows unprecedented results facing weathering and ageing.
Available sizes
CARTRIDGES 50 ML/C24
CARTRIDGES 490 ML/C12
-
TDS
-
SDS
| Key Features | - Very fast curing time - Non-sag, application on vertical surfaces - Temperature resistance even under stress - Excellent environmental resistance - Permanent toughness even after ageing - Low surface preparation |
| Elongation At Break | 30 % |
| Fixture Time | 5 - 8 @24°C [min] |
| Hardness | 70 - 80 shore_d |
| Applications | The optimum qualities are obtained at room temperature, between 12°C and 35°C without post-curing. Follow the instructions on the product operating guide or contact your Bostik representative for any information concerning product use, dispensing equipment or substrates application. |
| Range Of Application | The SAF 30-5 is recommended for the followed substrates: Steel DCPD PVC Stainless Steel Elium PS Aluminium Vinyester ABS Powder coated Steel Epoxy PC Polyester PMMA Glass |