RECTICOL 1D 124
Pressure sensitive adhesive
Product overview
Marocol PU1/D124 is a 1-component polyurethane
adhesive, which cures in contact with air humidity.
Available sizes
METAL DRUM(S) 200 KG/P4
CONTAINER(S) 1000 KG
| Key Features | - Easy process ( 1 component solution) - Good weather and water resistance - Gap filling |
| Features | - Gap filing
- Good weather and water resistance. - Good temperature resistance from -30°C till +90°C. - Easy and fast application. |
| Method Of Use | In general a good adhesion without a primer on polyester, polystyrene foam, polyurethane foam, plaster and plywood. On metal sheets, an excellent adhesion is achieved by roughening and degreasing with acetone. For lacquered and coated surfaces we advise to remove the layers by roughening and degreasing with acetone. For detailed information about these applications, please consult Bostik. Application conditions: Application temperature between +15ºC and +25ºC and a relative humidity between 40% and 60%. Substrate: The substrate should be dry, clean and free of dust and grease. Smooth non porous materials, such as metals, should be roughened and degreased. Application method: Machine, spatula. Application: Apply Marocol PU1/D124 one side (on strong porous surfaces two sides). Open time 20°C/55% R.H.: 70 minutes. The open time depends on temperature and the relative humidity. The open time is measured after mixing at a consumption of 200 - 400 g/m², a temperature of 20°C and a relative humidity of 55%. Assembling: After applying the adhesive, assemble the parts (within the open time) and immediately clamp or press (0.1 - 1 kg/cm²). Pressing time: ca. 8 hours at 20°C. The pressing time depends on temperature and relative humidity. The pressing time is measured at a consumption of 200 - 400 g/m². Curing time: The chemical reaction with water creates small air bubbles, thus expanding the adhesive, so the adhesive is gap filling and ideal for poor fitting work. However the thinner the adhesive is film the stronger the bond will be. Complete curing will take about 24 hours at a temperature of +20°C and a relative humidity of 55%. Depending on higher or lower temperatures the curing time will be shorter or longer. Consumption: 200 - 400 g/m² (depends on type of substrate and on the expected differences in thermal expansion). Cleaning: Uncured Marocol PU1/D124 can be removed with Solvent 5 or acetone. |