VITEL 1916NSB.F

After dilution in the appropriate solvent, Resin VITEL 1916NSB.F can be used on all dry laminating machines with smooth or rotogravure rollers. When applying resin VITEL 1916NSB.F to a substrate via extrusion, cool thoroughly before windup to reduce blocking. It is a very tough yet flexible polymer that exhibits a high tensile modulus. Also, the resin provides high cohesive strength in its applications and adheres well to a variety of substrates such as PET and PVC. Observe the following general extrusion conditions :
- Dry resin at 68°C for 4-5 hours before use
- Run feed throat cooling
- Zone 1 heated 166°C
- Die heated to 204°C  
These conditions are only a guide as extrusion conditions depend heavily on the specific process and extruder screw design.