SL C955 ADVANCED
High-performance smoothing compound suitable for applications without priming, including over old adhesive residues
Product overview
Bostik SL C955 ADVANCED is a two-part, high-performance smoothing compound that doesn’t require intensive subfloor preparation – saving you both time and money!
With exceptional flow characteristics, it can be applied directly to most common substrates without priming due to its high adhesion and low shrinkage properties, including old adhesive residues, ceramic tiles, Bostik damp proof membranes, flooring grade plywood, and resin flooring.
It’s unaffected by moisture, meaning it can be used over damp subfloors prior to the application of a damp proof membrane, and can be applied from 2mm to 30mm in a single application when bulked out with a suitable aggregate.
It has a fast walk-on time of two hours, while floor coverings can be laid in as little as four hours under good ambient drying conditions. The smoothing compound is specially formulated to be used in conjunction with waterborne underfloor heating systems and can also be used to encapsulate electric cable type heating.
With exceptional flow characteristics, it can be applied directly to most common substrates without priming due to its high adhesion and low shrinkage properties, including old adhesive residues, ceramic tiles, Bostik damp proof membranes, flooring grade plywood, and resin flooring.
It’s unaffected by moisture, meaning it can be used over damp subfloors prior to the application of a damp proof membrane, and can be applied from 2mm to 30mm in a single application when bulked out with a suitable aggregate.
It has a fast walk-on time of two hours, while floor coverings can be laid in as little as four hours under good ambient drying conditions. The smoothing compound is specially formulated to be used in conjunction with waterborne underfloor heating systems and can also be used to encapsulate electric cable type heating.
Geographic availability
- United Kingdom
Colors available
Grey
Smart Advantages
No priming - can be applied directly to most common substrates
Exceptional flow characteristics
Moisture tolerant - can be used prior to application of a damp proof membrane
-
TDS
-
SDS B
-
EPD
- No priming - can be applied directly to most common substrates
- Exceptional flow characteristics
- Moisture tolerant - can be used prior to application of a damp proof membrane
- Long wet edge
- Can be applied from 2mm to 30mm in a single pour, when bulked out with a suitable aggregate
- Suitable for use with water and electric underfloor heating systems
Related market & applications
Related products
GRIP A526 UNIVERSAL PRIMER
Solvent-free floor primer and bonding agent for all Bostik smoothing compounds
HYTEC E570 ONE COAT ACCELERATOR
Solvent-free additive to speed up the cure rate of HYTEC E570 ONE COAT.
HYTEC P510 RENORAPID PRIMER & MOISTURE VAPOUR SUPPRESSANT
1K PU primer & moisture vapour suppressant for all types of absorbent and non-absorbent subfloors
RENO E742 STRUCTURE
Solvent-free, two-part epoxy repair resin for repairing cracks and filling joints in reinforced concrete and sand/cement screeds
Rapid Repair Mortar
Ultra-fast patching compound for filling holes and cracks and step repairs
SL C500 ULTIMATE
Two-part smoothing compound that incorporates a blend of cements and aggregates combined with special additives.
SL C525 SMOOTH
Single part, high strength, polymer modified, cementitious smoothing compound
SL C540 FLOW
Two-part, protein and casein-free cementitious underlayment with improved workability
SL C910 SPEED 30
Rapid setting and drying smoothing compound with a walk on time of just 30 minutes
SL C951 DEEP
Protein-free, high strength smoothing compound suitable for raising floor levels and smoothing uneven subfloors
SL C955 ADVANCED
High-performance smoothing compound suitable for applications without priming, including over old adhesive residues
