All websites

Bostik can help ensure all electrical work passes the required assessments with it’s range of fire rated sealants and PVC bonding products. Its range of gap filling and finishing products can also help to make electrical service points aesthetically appealing.

Bonding PVC conduit is fast and easy with Bostik Type N PVC Cement in Blue or Clear. When ensuring that electrical service penetrations are up to fire code, you can’t go past Bostik’s range of fire rated sealants and foams. The Bostik Fireban range is rated to all manner of penetrations and void filing in fire rated systems.

The Bostik technical services team is always on hand to assist with installation recommendations and advice.

FIRE RATED SEALANTS 

  • Fireban One Sealant: a fire rated polyurethane joint sealant that is suitable for common fire rated control joints and penetration seals. This sealant provides a fire seal up to 240 minutes as per AS1530.4 This polyurethane joint sealant has an excellent adhesion to wide variety of surfaces. Fireban One is also resistant to weather ability conditions.
  • Firecaulk Acrylic Sealant: new and improved, this is a non-sag acrylic for sealing low movement interior joint (up to +/-25%). It has been tested in accordance with AS1530.4-2014 and AS4072.1-2005 for gaps up to 40mm.

PVC CONDUIT ASSEMBLY

  • PVC Pipe Cement (Type N): a solvent based PVC welding glue for bonding PVC conduit. This PVC cement has a high bond strength and rapid adhesion.

Bostik's Electricians solutions are backed by rigorous testing to ensure products of the highest quality that electricians can trust for the job. For more information, call us today on 0508 222 777 or email our team here.

CHOOSE YOUR TRADE BELOW 

PAINTERS & PLASTERERS

find solutions
bostik_nz-painters_products-teaser-1040x780.jpg

ARCHITECTS, SPECIFIERS & DESIGNERS

find solutions
bostik_nz-specifications-teaser-640x480.jpg
Top