CONFLEX

    Bostik-Conflex-tile-adhesive

    Key Features

    • Rubber modified formulation
    • All round use for bathroom, kitchen and general renovations of floors and walls
    • For use in residential or commercial applications

    Designed for demanding or high traffic applications

    Conflex is a great all-rounder when it comes to adhesive for tiles. It is a premium rubber-modified tile adhesive designed for demanding or high traffic applications. 

    Recommended Uses

    Conflex can be used to tile bathrooms, kitchens, living areas or other general internal applications, and is suitable for commercial and tile-on-tile installations. For best performance, surfaces must be primed with an appropriate Bostik primer such as Prime Grip for non-porous substrates, Multiprime for porous substrates and Specialist Primer when priming over Dampfix PU waterproofing membrane.

    Finish your tiling masterpiece with the Bostik Design two-part epoxy grout to really leaving a long lasting perfect impression.

    Product Details

    • Conflex is a great all round tile adhesive, perfect for concrete, rendered bricks, green screed, plasterboard and more
    • Rated as a C2S1TE – can be used in demanding and high traffic situations
    • Tiling in either residential or commercial areas? Use Conflex for a reliable stick, every time
    • Conflex’s rubber modified formulation can be used in internal and external areas, on floors or walls
    • If you are concerned about rising damp or don’t have time for the slab to fully cure before tiling, prepare the substrate with Bostik’s epoxy floor coating, Moisture Seal

    Technical Data Sheet

    Safety Data Sheet

    FAQs

    CAN I TILE OVER POLYURETHANE WATERPROOFING MEMBRANES?  WHAT DO I USE?

    Bostik has developed a system for tiling directly over our Dampfix PU solvent based polyurethane membrane. This system involves applying Specialist Primer over the membrane, and then using Asaflex as the tile adhesive. Consult the Technical Data Sheets for these products, or Bostik Smart Help for more information.

    WHAT SIZE NOTCH TROWEL DO I USE FOR THE TILE I’VE CHOSEN?

    As a guide, it is recommended to use a 6mm notch for tiles up to 150x150mm, a 10mm notch for up to 250x250mm and a 12mm notch for 300x300mm tiles.  Tiles 400x400mm and larger should be back-buttered in addition to using a 12mm notched trowel

    WHAT PRODUCTS CAN I USE WITH NATURAL STONE? WHAT IS ‘MOISTURE STABLE STONE’?

    Natural stone contains capillaries and pores within its structure. The size and quantity of these will influence the way water is absorbed. As water is absorbed by the stone it can cause the stone to warp and bend.  Moisture stable stone has a structure which does not result in any deformation of the stone. It is said to be moisture stable.

    DO I NEED TO PRIME FIRST?  

    Priming helps improve the consistency of the substrate, making it more accepting of waterproofing membrane therefore enhancing the bond between substrate and membrane and improves the bond between substrate and membrane.  A well primed surface can also improve the coverage of waterproofing membranes.

    ARE BOSTIK ADHESIVES COMPATIBLE WITH COMPETITORS WATERPROOFING MEMBRANES AND GROUTS?

    Bostik adhesives have been tested with a selection of recognized competitor products but it is best to use the entire Bostik Substrate to Surface system to ensure a warrantable finish. Contact Bostik Smart Help if you are unsure if the products that you are using will be compatible.

    WHAT PRIMER SHOULD I BE USING?

    Check the cleaned surface by apply a small amount of water.  It will be easily absorbed if porous and bead on the surface if not.

    • Treat porous surfaces with Bostik Multiprime. 
    • Most non-porous surfaces may be primed with Bostik PrimeGrip Non-Porous Primer.

    WHAT IS THE ORDER OF APPLICATION OF BOSTIK PRODUCTS?

    Prep, Seal, Stick, Finish.   

    Prep substrates with appropriate primer, Seal your substrate with an appropriate waterproofing membrane.  Once the substrate is prepared, select the correct adhesive to Stick your tiles to the surface.  Finish with one of the grouts from Bostik’s wide selection of colours and textures for all appropriate applications.

    Related Products

    ULTRASET DX

    Quick setting, controlled foaming, timber flooring adhesive

    View Product

    ULTRASET® SF

    Solvent free polyurethane elastomeric adhesive

    View Product

    ULTRASET® SINGLESTEP2®

    Advanced Tri-Linking™ adhesive, moisture control and sound reduction membrane

    View Product

    5612 MASTIC

    Non Skinning Butyl Mastic Sealant

    View Product

    6S NEUTRAL CURE

    Sanitary and tiling silicone sealant

    View Product

    Anchor Weld 2800 FF

    Heat resistant foam contact adhesive

    View Product

    back to top