Bostik’s BEST® is a high-performance wood floor adhesive and moisture control membrane
Bostik's BEST® has low VOC’s (measured per EPA Method 24) and does not contain any water. Bostik's BEST® contains Bostik's BLOCKADE™ antimicrobial protection, which inhibits the growth of bacteria, mold, or mildew on the surface of the dried urethane adhesive.
Get moisture protection and a wood floor adhesive
Bostik’s BEST® urethane glue has very low moisture vapor permeability and is not adversely affected by moisture vapor. As a result, it will reduce moisture vapor transmission through concrete. When applied as directed as a moisture vapor membrane, it will prevent damages caused by subfloor moisture beneath dimensionally stable, engineered wood flooring only.
With Bostik’s BEST® urethane adhesive, costly and time consuming concrete moisture testing is no longer required for engineered hardwood flooring when the slab is properly prepared, dry to the touch, and fully cured. For solid hardwood or bamboo on substrates >3 lbs. or 75% RH, use Bostik’s MVP4™ prior to the application of Bostik’s BEST® wood floor adhesive for unlimited moisture vapor protection, or use Bostik Ultra-Set® SingleStep2™ or GreenForce®.
A urethane adhesive that moves with your subfloor for superior anti-fracture performance
The elastomeric characteristics of Bostik's BEST® urethane glue establish an anti-fracture membrane that can bridge cracks up to 1/8" (3mm) which can occur in the substrate prior to or after installation. This superior elasticity allows the urethane adhesive to move with the wood as it expands and contracts with changes in humidity and temperature over the life of the floor.
Bostik’s BEST® is the most versatile wood floor adhesive on the market
Bostik’s BEST® urethane adhesive can be used to adhere all engineered, solid (adhesive only), bamboo (adhesive only), cork, and parquet hardwood flooring (adhesive only). Bostik’s BEST® urethane adhesive may be used over all properly prepared substrates common to hardwood flooring installations including concrete, plywood, OSB, well bonded vinyl/VCT and ceramic tile, cement backer board, gypsum underlayments (dry, above-grade), cement patch/underlayments, radiant-heat flooring, and properly prepared terrazzo. This adhesive can also be used to install plywood as described below, as well as ceramic tile, marble, and stone inlays for light commercial or residential use.
|Where to Use||Substrates||Materials|
|Residential||Concrete||Solid hardwood flooring|
|Offices and light commercial||Plywood||Engineered hardwood flooring|
|Heavy commercial||OSB||Bamboo flooring|
|Offices||Well-bonded vinyl||Cork flooring|
|Cement backer board||Ceramic tile, marble, and stone inlays (in residential or light commercial only)|
|Gypsum underlayments (dry, above-grade)|