DAMPFIX® PEEL & STICK
Waterproofing sheet membrane for faster installations
Product overview
Dampfix® Peel & Stick is a complete wet room sealing solution which provides a watertight barrier on floors
and walls. The innovative design requires no drying and can be tiled directly after laying, reducing installation time*. It's best for indoor applications such as domestic bathrooms and showers.
- Tested to AS4858 and AS4654.1
- No drying time - flood test, then tile immediately and directly using approved Bostik tile adhesives
- No mixing required
- No spray-on adhesive required - excellent adhesion to concrete, rendered masonry, wet area plasterboard, FC sheet and plywood
- Excellent flexibility and adhesion at all application temperatures
- Solvent free
Uses for Dampfix® Peel & Stick include:
- As a waterproofing membrane to internal wet area shower, bathroom, kitchen, laundry & toilet areas.
- All applications to be covered by tile or other natural stones.
- Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood (Type A Stamped “PAA JAS-ANZ” to AS/NZS2269 2004) substrates.
*Compared to traditional liquid waterproofing membranes, which may need multiple coats and up to 72 hours for flood test.
and walls. The innovative design requires no drying and can be tiled directly after laying, reducing installation time*. It's best for indoor applications such as domestic bathrooms and showers.
- Tested to AS4858 and AS4654.1
- No drying time - flood test, then tile immediately and directly using approved Bostik tile adhesives
- No mixing required
- No spray-on adhesive required - excellent adhesion to concrete, rendered masonry, wet area plasterboard, FC sheet and plywood
- Excellent flexibility and adhesion at all application temperatures
- Solvent free
Uses for Dampfix® Peel & Stick include:
- As a waterproofing membrane to internal wet area shower, bathroom, kitchen, laundry & toilet areas.
- All applications to be covered by tile or other natural stones.
- Suitable for concrete; cement rendered masonry; FC sheeting; water resistant plasterboard; and structural plywood (Type A Stamped “PAA JAS-ANZ” to AS/NZS2269 2004) substrates.
*Compared to traditional liquid waterproofing membranes, which may need multiple coats and up to 72 hours for flood test.
Geographic availability
- Australia
Smart Advantages
No drying time - flood test, then tile immediately and directly using approved Bostik tile adhesives
No mixing required
Solvent free
-
TDS
-
Brochure
