Brands and countries
It may occur that sealant joints show discoloration after a couple of days or weeks. In general the joints can be considered as a reasonably colour stable product. The best colour stability can be achieved with acetoxy curing silicone sealants and acrylic sealants. Neutrally curing silicone, some hybrid and polyurethane sealants are more sensitive to yellowing, which in many cases is caused by contact with chemical vapours and fluids.
In practice it seems that if discoloration of the sealant joint occurs, this most often is caused by local circumstances, which will be further illustrated below.

Discoloration can be caused by

  • Long-term lack or exposure to UV
  • A result of contact of vapours
  • The type of substrate material
  • A result of contact with fluids

Chemical vapours/Chemicals in general/Solvents

Vapours from detergents, chemicals and solvents may result in the yellowing of the sealant. Even if an acetoxy curing silicone sealant is in the same area as neutral curing silicone sealant this could result in discolouring of the neutral curing sealant. Coming into contact with cigarette smoke can cause yellowing. Make sure that during the curing phase of the sealant no acid or alkaline fluids, or vapours are able to come in contact with the sealant.

Discoloration caused by substrate material

This situation concerns surfaces which contain ingredients that can migrate through the sealant and cause discoloration on the surface of the joint. Substrates known for this migration problem are bitumen, Neoprene, E.P.D.M., wax-containing products, and adhesive layers (including adhesives used on transportation/protecting foils).

Direct contact with these materials should be avoided by using backfilling or P.E. foam strip.

Another form of yellowing can occur if the sealant joints are taped with self-adhesive tape. This may happen when joints are taped before painting of ceilings or walls. Ingredients from the layer of glue can migrate into the sealant surface and lead to yellowing after the tape is removed.

Discoloration caused by fluids/liquids

Liquids can cause discoloration, especially when they do contain acid - or alkaline ingredients. Think of cleaners, or even the soapy water used by the applicator to smooth the joint. (For soapy water always use a neutral soap).

Have a question about sealant discolouration

Contact us on 1800 Bostik