ULTRA LEVEL PLUS C700
High flow, cement-based self-levelling underlayment
Product overview
Bostik Ultra Level Plus C700 is a high flow, cement-based self-levelling underlayment that mixes with water and pours to a smooth, level finish. It's built to achieve maximum flow without shrinkage or cracking, so it does the flattening work for you rather than fighting the slab. Being a single-component powder, it's a straightforward, single-operation job on site, ready to pump or spread by hand depending on the area.
It suits new construction and refurbishment alike, levelling both new and old concrete substrates ahead of vinyl, carpet, timber, laminate, or tile installation. Screeders and levelling contractors reach for it on residential, commercial, and medium industrial jobs because it holds its flatness and strength through to floor covering day without reflective cracking coming back to bite the finish.
Why choose Ultra Level Plus C700?
Ultra Level Plus C700's low VOC formula is a clean choice for occupied or sensitive sites. Made in Australia, it builds strength fast, so the bond to the slab holds firm under floor coverings for the long haul. It offers a reflow time of over 60 minutes, giving installers a comfortable working window before it starts to set, and floors are ready for foot traffic in 14 to 16 hours and ready to receive floor coverings in just 24 hours. It can be feathered right down to nothing or built up to 50mm in a single pour.
Where to use it
Use it as an underlayment ahead of vinyl, carpet, timber and laminate, or tile, on new or old concrete substrates in residential, commercial, and medium industrial settings.
Check the TDS for the full details of suitability.
TIP: For jobs where the floor needs to take foot traffic again within hours rather than a full day, try Ultra Level C500, a rapid-hardening levelling compound.
It suits new construction and refurbishment alike, levelling both new and old concrete substrates ahead of vinyl, carpet, timber, laminate, or tile installation. Screeders and levelling contractors reach for it on residential, commercial, and medium industrial jobs because it holds its flatness and strength through to floor covering day without reflective cracking coming back to bite the finish.
Why choose Ultra Level Plus C700?
Ultra Level Plus C700's low VOC formula is a clean choice for occupied or sensitive sites. Made in Australia, it builds strength fast, so the bond to the slab holds firm under floor coverings for the long haul. It offers a reflow time of over 60 minutes, giving installers a comfortable working window before it starts to set, and floors are ready for foot traffic in 14 to 16 hours and ready to receive floor coverings in just 24 hours. It can be feathered right down to nothing or built up to 50mm in a single pour.
Where to use it
Use it as an underlayment ahead of vinyl, carpet, timber and laminate, or tile, on new or old concrete substrates in residential, commercial, and medium industrial settings.
Check the TDS for the full details of suitability.
TIP: For jobs where the floor needs to take foot traffic again within hours rather than a full day, try Ultra Level C500, a rapid-hardening levelling compound.
Geographic availability
- Australia
Smart Advantages
Single component product, just add water
Carpet or tile may be applied after 24 hours
Over 60 minutes of reflow time, giving a generous working window before set
ABOUT ULTRA LEVEL PLUS C700
- Single component product, just add water
- Fast application, single operation
- Carpet or tile may be applied after 24hours
- Can be applied directly onto prepared concrete surfaces
- Pumpable or manual application - high flow
- Good pot life and working time
RECOMMENDED USES
- Levelling new and old concrete substrates
- Recommended underlayment for all Commercial & Domestic Vinyl, Carpets, Timber / Laminates, Tiles
- Residential, commercial and medium industrial application.
- New construction and refurbishment
- Internal
Related market & applications
Wall & Floor
- Floor Preparation
