RENO C715 EASY FLASH | Floor Preparation

RENO C715 EASY FLASH is a rapid-drying, cement-based repair and smoothing mortar for internal wall and floor applications. It is designed for fast patching and smoothing of surface imperfections in both new build and renovation projects. RENO C715 EASY FLASH provides a very smooth finish and fast recovery, allowing most floor coverings to be installed shortly after application. Its versatility allows application on a wide range of substrates, often without the need for priming, making it a practical and time-efficient solution for surface preparation prior to flooring installation.

Key Benefits

Rapid drying for fast repairs and reduced downtime
Feather-edge application up to 15 mm
No priming required on most substrates
Easy to mix and apply
Very smooth finish suitable for floor coverings
Fast recovering
Suitable for a wide range of substrates

Characteristics

Product type: Fast-setting repair and smoothing mortar
Composition: Cement-based powder with special additives
Colour : Grey
Application thickness: Feather edge to 10 mm (up to 15 mm for localized repairs)
Coverage: Approx. 1.2 kg/mm/m²
Mixing ratio: Approx. 4.5 litres of water per 15 kg bag
Working time : Approx. 15 minutes
Walk-on time: Approx. 30 minutes at +23°C
Floor covering installation:
- Up to 0.5 mm : 30 minutes
- 0.5–10 mm :
  - Ceramic tiles : ~1 hour
  - Resilient flooring : 1–2 hours
  - Hardwood flooring : ~12 hours