HYTEC E736 TURBO

BENEFITS

• Rapid curing: 4h
• High technical performance
• No limit on moisture level
• Low consumption: one coat application 500-600g/m²

CHARACTERISTICS

• Color: Black glitter
• Curing time: 4h
• Coverage: 500 to 600 g/m²
• Moisture protection level: no limit  

APPLICATION

Open the kits and pour all the resin into the hardener and mix thoroughly until a homogeneous mixture is obtained.

Apply the two-component epoxy resin with a spatula TKB-B2 (500-600g/m²).

After application use a spiked roller over the entire surface to avoid any risk of air bubbles. Allow to dry for approximately 4h at 20°C.

Apply GRIP A936 XPRESS sanded primer with a short hair roller (100-120g/m²). Allow a drying time of 2 hours before applying the self-levelling compound and the adhesive for soft floor covering.

After 2h of the application of the sanded primer you can apply wood floor adhesive for the installation in direct of engineered parquet with all widths.

Approved subfloors:

• Raw concrete
• Helicopter surfaced concrete
• Cement screed
• Tiling