Brands and countries

BENEFITS

  • Very high mechanical resistance
  • Rapid drying
  • No sanding

CHARACTERISTICS

  • Color: grey
  • Working time: 20min
  • Walk on time: 1h
  • Coverage: 1,5 kg/mm/ m²
  • Curing time:
    • Tiling: 2h
    • PVC: 4h
    • Linoleum, rubber: 24h
    • Wood floor: 24h

APPLICATION

Measure 6 liters of clean, cold water into a clean mixing bucket. Gradually add the bag of Bostik SL C910 XPRESS to the water, whilst continually mixing with an electric drill and mixing paddle until a smooth lump-free mixture is obtained. This will normally be achieved after 2 minutes. The mixture will retain its self-smoothing capability for approximately 20 minutes under normal conditions. Pour the mixed material onto the prepared substrate to a thickness between 1mm and 10mm. Using a smooth edge stainless steel trowel, smooth over the wet product to gain the desired thickness and smoothness. A pin level may be used to assist in gaining the required depth. Use a spiked roller to remove any trapped air and flow lines, to give a uniform surface appearance.

Discover our other Floor Preparation products

HYTEC E736 TURBO

Discover More
bostik-global-product-hytec-e736-640x480.jpg
Top